Dental Artificial Intelligence Systems: A Review of Various Data Types.

With the rapid development of dental artificial intelligence systems (DAIS), a new field known as "Data Dentistry", proposed by Schwendicke in 2021, has successfully bridged the gap between medicine and engineering. This literature review introduces advanced techniques in data collection, outlines the current state of DAIS in data processing, and anticipates the future of DAIS by emphasizing the importance of more extensive and enhanced datasets. The key findings include: Versatility of imaging data: Various types of imaging data, such as X-ray, cone beam computed tomography (CBCT), facial photos, and face and oral scans, can be transformed into datasets used by artificial intelligence systems. Uniform rules in electronic dental record (EDR) systems: EDR systems require standardized rules for general use in DAIS, ensuring compatibility and seamless integration. Potential of wearable device data: Data from wearable devices, including bioelectric signals (such as electromyography), stress sensors, AR glasses, etc., show great potential for enhancing DAIS capabilities. Current DAIS performance focus: Presently, DAIS demonstrate superior performance in object location and disease diagnosis compared to information integration and clinical decision-making. Need for data quality and quantity improvement: Further improvements are needed in both the quality and quantity of data for DAIS.

Comparison between basal arch width in normal occlusions and class â ¡ malocclusions by using cone-beam computed tomography.

Objective: The purpose of this research was to investigate the measurements of maxillary and mandibular basal arch width in male and female with normal occlusion, and to compare dental arch width difference between normal occlusion and ClassⅡ malocclusion groups could be helpful in orthodontic diagnosis and treatment planning. Methods: Cone-beam computed tomography (CBCT) images from 133 individuals (76 males and 57 females) with normal occlusion and 64 (25 males and 39 females) with skeletal Class II malocclusions were evaluated. The distances between canines, first molars (basal arch widths: BAW) and second molars were measured from CRs (center of resistance) of the teeth and the projection of first molars on buccal bones (WALA distance) were measured. Results: There were significant differences in male and female maxillary and mandibular dental transverse widths. The normal range of the maxilla and mandible basal bone widths differences were -2 mm-2 mm (-0.05 ± 2.17 mm). The normal occlusion and Class Ⅱ groups exhibited significant differences in the width of the intercanine and first molars. Sella-nasion-A point angle (SNA) and Sella-nasion-B point angle (SNB) in the Class Ⅱ male group were positively correlated with the width between the maxillary canines. For individuals with normal occlusions, the width of the mandible at the second molar was greater than that of the maxilla, so more attention should be paid to the width of the second molar when considering clinical treatment. Conclusion: Measuring the width of the maxilla and mandible basal bones from the resistance center of the first molar was a feasible and repeatable method can be used in clinical practice. The data could serve as a reference for orthodontic treatment planning. More consideration should be paid to the horizontal dental problems of the treatment plan for Class Ⅱ patients. And the width of the mandible at the second molar was greater than that of the maxilla, so more attention should be paid during treatment.

Three-dimensional spatial analysis of temporomandibular joint in adolescent Class II division 1 malocclusion patients: comparison of Twin-Block and clear functional aligner.

BACKGROUND: Our study aimed to use three-dimensional (3D) spatial morphological measurement methods to compare the influence of Twin-Block and clear functional aligners on the temporomandibular joint (TMJ) of adolescent Class II division 1 malocclusion mandibular retraction patients. We also aimed to explore the similarities and differences in the effects on the TMJ upon using Twin-Block and clear functional aligner. METHODS: Cone-beam computed tomography (CBCT) data of 49 patients with Class II division 1 malocclusion (Twin-Block group: 24; clear functional aligner group: 25) were collected before and after functional orthodontic treatment, and a 3D model of the TMJ was reconstructed using MIMICS 21.0 software. Eighteen measurement parameters, including the anterior, superior, and posterior joint spaces, were measured and compared using the 3D model. RESULTS: After the two groups underwent functional appliance treatment, the height, volume, and surface area of the condyle, length of the mandibular ramus and mandibular length increased; The retro-displaced condyle moved to the middle position of the articular fossa, while the rest of the condylar position did not change significantly. Remodeling of the articular fossa after treatment was not evident. The superior joint space of the clear functional aligner group increased, but there was no significant change after Twin-Block appliances treatment. CONCLUSIONS: Both appliances promote condylar growth and sagittal and vertical development of the mandible in adolescent Class II division 1 malocclusion mandibular retraction patients. The length of the mandibular ramus showed a more significant increase following treatment with the Twin-Block appliances than with clear function aligners.

METTL3-Mediated m6A Modification Regulates the Osteogenic Differentiation through LncRNA CUTALP in Periodontal Mesenchymal Stem Cells of Periodontitis Patients.

Objective: Periodontitis is a chronic inflammatory disease that causes loss of periodontal support tissue. Our objective was to investigate the mechanism by which METTL3-mediated N6-methyladenosine modification regulates the osteogenic differentiation through lncRNA in periodontal mesenchymal stem cells in patients with periodontitis (pPDLSCs). Material and Methods. We carried out a series of experiments, including methylated RNA immunoprecipitation-PCR, quantitative real-time polymerase chain reaction, and western blotting. The expressions of alkaline phosphatase (ALP), Runx2, Col1, Runx2 protein level, ALP staining, and Alizarin red staining were used to demonstrate the degree of osteogenic differentiation. Results: We found that METTL3 was the most significantly differentially expressed methylation-related enzyme in pPDLSCs and promoted osteogenic differentiation of pPDLSCs. METTL3 regulated the stability and expression of lncRNA CUTALP, while lncRNA CUTALP promoted osteogenic differentiation of pPDLSCs by inhibiting miR-30b-3p. At different time points of osteogenic differentiation, lncRNA CUTALP expression was positively correlated with Runx2, while miR-30b-3p showed the opposite pattern. The attenuated osteogenic differentiation induced by METTL3 knockdown was recovered by lncRNA CUTALP overexpression. The attenuated osteogenic differentiation induced by lncRNA CUTALP knockdown could be reversed by the miR-30b-3p inhibitor. Conclusions: In summary, METTL3/lncRNA CUTALP/miR-30b-3p/Runx2 is a regulatory network in the osteogenic differentiation of pPDLSCs.

A retrospective study of alveolar bone remodelling after anterior retraction in orthodontic tooth extraction cases with clear aligners and fixed appliances.

OBJECTIVES: To evaluate alveolar bone dimensions and its relationship with tooth movement (retraction, intrusion and torque) during orthodontic treatment with fixed appliance and clear aligners. METHODS: Thirty-two patients were included in this retrospective clinical study. Cone beam computed tomography (CBCT) was collected before and after treatment to measure the volume of dehiscence and fenestrations in the maxillary anterior region, anterior alveolar bone thickness and height and degree of tooth movement. Rank-sum tests were used to compare the differences in alveolar bone defect volumes between clear aligners and fixed appliance, multiple linear regression analysis was used for study evaluation, and kappa statistics were used to assess internal consistency and test-retest reliability. RESULTS: Post-operatively, most alveolar bone defects occurred on the labial side. The incidence of bone fenestration was 23.96% in the clear aligner group and 26.18% in the fixed appliance group, which was higher than the incidence of bone dehiscence (5.21%). The labial bone height decreased by 0.272 mm, and the palatal bone height increased by 0.617 mm for every 1 mm downward intrusion of the anterior tooth apex in the fixed appliance group. In the clear aligner group, there was no significant change in the labial bone height, and the palatal bone height decreased by 0.447 mm for every 1 mm of anterior tooth retraction coronally. CONCLUSIONS: In the fixed appliance group, anterior tooth intrusion and retraction may have led to alveolar bone resorption by its compression at the cervical level. This study provides a three-dimensional tooth movement evaluation method by using CBCT.

Biomechanical effects of different staging and attachment designs in maxillary molar distalization with clear aligner: a finite element study.

BACKGROUND: In the present study, the effects of distalizations of one and two molars with different step distances and attachment designs have been analyzed. METHODS: A 3D finite element analysis model has been developed in order to determine the tendency of tooth displacement and stress distribution with clear aligner treatment. RESULTS: Under the condition of single-molar distalization, when the step distance was set to 0.25 mm, the total displacement was 0.086 mm for central incisors, 0.080 mm for lateral incisors, 0.084 mm for canines, 0.102 mm for the first premolar and 0.076 mm for the second premolar. The von Mises stress of roots and the principal stress of the periodontal ligament was slightly lower than in the control group when the step distance was set to 0.130 mm. Under the condition of two-molar distalization, when the step distance was set to 0.130 mm, the total displacements for central incisors, lateral incisors and canines as well as both the first and second maxillary molars were basically the same as with a distance of 0.250 mm for one-molar distalization. In addition, when the step distance was 0.130 mm with two-molar distalization, the rotation center of the first and second molar was closer to the apex of the root indicating that the smaller step distance led to more bodily movement during the two-molar distalization. However, displacement tendencies of the first molar and the second molar were basically the same whether horizontal or vertical rectangular attachments were added. CONCLUSIONS: A step distance of moving two molars to 0.130 mm can achieve the same reaction force on the anterior teeth as moving one molar 0.250 mm without effects on horizontal or vertical rectangular attachments. CLINICAL RELEVANCE: Our results provide a theoretical basis and guidance for simultaneously moving two molars backward in clinical practice using a clear aligner.

Distraction osteogenesis promotes temporomandibular joint self-remodeling in the treatment of mandibular deviation caused by condylar ankylosis.

Craniofacial deformity and malocclusion are primary concerns following temporomandibular joint ankylosis (TMJa) in growing patients, and they pose even greater challenges in adult patients. The treatment objectives always involve restoring proper jawbone structure, achieving stable occlusion, and attaining satisfactory joint mobility. This report presents a 4-year follow-up of an adult patient with TMJa-induced mandibular deviation, who underwent a combined treatment approach involving distraction osteogenesis (DO) and orthodontic-orthognathic surgery. Orthodontic treatment resulted in favorable occlusion and improved facial esthetics. A new condyle with a reconstructed glenoid fossa in a forward position was established after mandibular DO and the damaged TMJ experienced self-remodeling owing to functional improvement. Thus, this case demonstrates the efficacy of DO in promoting adaptive TMJ self-remodeling with long-term stability when treating mandibular deviation caused by condylar ankylosis in adult patients.

Temporal Immunomodulation via Wireless Programmed Electric Cues Achieves Optimized Diabetic Bone Regeneration.

Mimicking the temporal pattern of biological behaviors during the natural repair process is a promising strategy for biomaterial-mediated tissue regeneration. However, precise regulation of dynamic cell behaviors allocated in a microenvironment post-implantation remains challenging until now. Here, remote tuning of electric cues is accomplished by wireless ultrasound stimulation (US) on an electroactive membrane for bone regeneration under a diabetic background. Programmable electric cues mediated by US from the piezoelectric membrane achieve the temporal regulation of macrophage polarization, satisfying the pattern of immunoregulation during the natural healing process and effectively promoting diabetic bone repair. Mechanistic insight reveals that the controllable decrease in AKT2 expression and phosphorylation could explain US-mediated macrophage polarization. This study exhibits a strategy aimed at precisely biosimulating the temporal regenerative pattern by controllable and programmable electric output for optimized diabetic tissue regeneration and provides basic insights into bionic design-based precision medicine achieved by intelligent and external field-responsive biomaterials.

Effective contribution ratio of the molar during sequential distalization using clear aligners and micro-implant anchorage: a finite element study.

INTRODUCTION: This study aims to investigate the biomechanical effects of anchorage reinforcement using clear aligners (CAs) with microimplants during molar distalization. And also explores potential clinical strategies for enhancing anchorage in the sequential distalization process. METHODS: Finite element models were established to simulate the CAs, microimplants, upper dentition, periodontal ligament (PDL), and alveolar bone. In group set I, the 2nd molars underwent a distal movement of 0.25 mm in group set II, the 1st molars were distalized by 0.25 mm after the 2nd molars had been placed to a target position. Each group set consisted of three models: Model A served as the control model, Model B simulated the use of microimplants attached to the aligner through precision cuts, and Model C simulated the use of microimplants attached by buttons. Models B and C were subjected to a series of traction forces. We analyzed the effective contribution ratios of molar distalization, PDL hydrostatic stress, and von Mises stress of alveolar bone. RESULTS: The distalization of the 2nd molars accounted for a mere 52.86% of the 0.25-mm step distance without any reinforcement of anchorage. The remaining percentage was attributed to the mesial movement of anchorage teeth and other undesired movements. Models B and C exhibited an increased effective contribution ratio of molar distalization and a decreased loss of anchorage. However, there was a slight increase in the undesired movement of molar tipping and rotation. In group set II, the 2nd molar displayed a phenomenon of mesial relapse due to the reciprocal force produced by the 1st molar distalization. Moreover, the efficacy of molar distalization in terms of contribution ratio was found to be positively correlated with the magnitude of force applied. In cases where stronger anchorage reinforcement is required, precision cuts is the superior method. CONCLUSIONS: The utilization of microimplants in conjunction with CAs can facilitate the effective contribution ratio of molar distalization. However, it is important to note that complete elimination of anchorage loss is not achievable. To mitigate undesired movement, careful planning of anchorage preparation and overcorrection is recommended.

Deep learning-enabled 3D multimodal fusion of cone-beam CT and intraoral mesh scans for clinically applicable tooth-bone reconstruction.

High-fidelity three-dimensional (3D) models of tooth-bone structures are valuable for virtual dental treatment planning; however, they require integrating data from cone-beam computed tomography (CBCT) and intraoral scans (IOS) using methods that are either error-prone or time-consuming. Hence, this study presents Deep Dental Multimodal Fusion (DDMF), an automatic multimodal framework that reconstructs 3D tooth-bone structures using CBCT and IOS. Specifically, the DDMF framework comprises CBCT and IOS segmentation modules as well as a multimodal reconstruction module with novel pixel representation learning architectures, prior knowledge-guided losses, and geometry-based 3D fusion techniques. Experiments on real-world large-scale datasets revealed that DDMF achieved superior segmentation performance on CBCT and IOS, achieving a 0.17 mm average symmetric surface distance (ASSD) for 3D fusion with a substantial processing time reduction. Additionally, clinical applicability studies have demonstrated DDMF's potential for accurately simulating tooth-bone structures throughout the orthodontic treatment process.

Actual contribution ratio of maxillary and mandibular molars for total molar relationship correction during maxillary molar sequential distalization using clear aligners with Class II elastics: A finite element analysis.

INTRODUCTION: Class II elastics, in combination with clear aligners (CA), are efficient for molar distalization. However, the effects of this combination on intermaxillary molar relationship correction have yet to be investigated. This study aimed to investigate the actual contribution ratio of the maxillary and mandibular molars for total molar relationship correction during maxillary molar distalization using Class II elastics with CA and further explore therapeutic recommendations for clinical practice. METHODS: Finite element models (FEMs) were established, including the distalization of the second molars (Set I), followed by the distalization of the first molars (Set II). Model A simulated elastics attached by precision cutting, whereas Model B simulated elastics attached to buttons. Force magnitudes of 100 g, 150 g, and 200 g of force were applied. We recorded the contribution ratio of the maxillary and mandibular molars for total molar relationship correction, effective distalizing distance in 0.25 mm step distance, tipping and rotation angles, and the hydrostatic stress in the periodontal ligament. RESULTS: During maxillary molar distalization, mesialization of the mandibular molar had a notable contribution ratio for molar relationship correction. The mandibular first molar was mesialized with mesiolingual rotation tendency. Approximately half of the 0.25 mm step distance was occupied by maxillary molar distalization; the remainder was occupied by anchorage teeth mesialization and tipping or rotation. When traction forces increased, the total molar relationship correction and effective distalization increased; the mandibular molars mesialization contribution ratio also increased, as did rotation and inclination tendency. Precision cutting had a higher total molar relationship correction and more effective distalization than a button but also had a larger contribution ratio of mandibular molar mesialization and inclination or rotation. CONCLUSIONS: Mandibular molar mesialization should be considered when correcting the molar relationship using CA with intermaxillary elastics during maxillary molar distalization. It is also important to consider the anchorage teeth mesialization and undesired tipping or rotation.

LncRNA00638 promotes the osteogenic differentiation of periodontal mesenchymal stem cells from periodontitis patients under static mechanical strain.

BACKGROUND: The osteogenic differentiation capacity of periodontal mesenchymal stem cells (PDLSCs) can be influenced by different levels of static mechanical strain (SMS) in an inflammatory microenvironment. Long non-coding RNAs (lncRNAs) are involved in various physiological processes. However, the mechanisms by which lncRNAs regulate the osteogenic differentiation of PDLSCs remain unclear. METHODS: We investigated the responses of PDLSCs obtained from periodontitis patients and healthy people to 8% and 12%SMS. Gene microarray and bioinformatics analyses were implemented and identified lncRNA00638 as a target gene for the osteogenesis of PDLSCs from periodontitis patients under SMS. Competing endogenous RNA (ceRNA) network analysis was applied and predicted interactions among lncRNA00638, miRNA-424-5p, and fibroblast growth factor receptor 1 (FGFR1). Gene expression levels were regulated by lentiviral vectors. Cell Counting Kit-8 assays, alkaline phosphatase assays, and Alizarin Red S staining were used to examine the osteogenic potential. RT-qPCR and Western blot were performed to detect the expression levels of related genes and proteins. RESULTS: We found that 8% and 12% SMS exerted distinct effects on HPDLSCs and PPDLSCs, with 12% SMS having the most significant effect. By microarray analysis, we detected differentially expressed lncRNAs/mRNAs between 12% SMS strained and static PPDLSCs, among which lncRNA00638 was detected as a positive target gene to promote the osteogenic differentiation of PPDLSCs under SMS loading. Mechanistically, lncRNA00638 may act as a ceRNA for miR-424-5p to compete with FGFR1. In this process, lncRNA00638 and miR-424-5p suppress each other and form a network to regulate FGFR1. CONCLUSIONS: Our findings demonstrate that the lncRNA00638/miRNA-424-5p/FGFR1 regulatory network is actively involved in the regulation of PDLSC osteogenic differentiation from periodontitis patients under SMS loading, which may provide evidence for optimizing orthodontic treatments in patients with periodontitis.

Evaluation of alveolar bone morphology of incisors with different sagittal skeletal facial types by cone beam computed tomography: A retrospective study.

Background: Safe orthodontic tooth movement should be performed within the alveolar bone. The purpose of this study was to evaluate the morphology of the alveolar bone of incisors. Materials and methods: This retrospective study included pretreatment cone beam computed tomography of 120 patients with malocclusion. Patients were divided into 4 groups (Class I, Class II division 1, Class II division 2 and Class III) according to the subspinale-nasion-supramental (ANB) angle and occlusal relationship. The sagittal root positions, anterior and posterior root-cortical bone angles (AR-CA and PR-CA), root-crown ratios (RCR) and alveolar bone thickness were evaluated. Results: The sagittal root positions were mainly positioned against the labial cortical plate in the maxillary incisors of the Class II division 2 group and engaged by both the labial and palatal cortical plates in the mandibular incisors of the Class III group. The AR-CA was lower than that in the other groups (P < 0.01) in the maxillary incisors of the Class II division 2 group, and the AR-CA and PR-CA were lower than those in the other groups (P < 0.01) in the mandibular incisors of the Class III group. The alveolar thickness showed no significant difference between the Class II division 1 group and the Class I group (P > 0.05), the middle and lower anterior alveolar thickness (LAAT and MAAT) were lower than those in other groups (P < 0.01) in the maxillary incisors of the Class II division 2 group, and the alveolar thickness at the measurement sites of the middle and lower line were lower than those in other groups (P < 0.01) in the mandibular incisors of the Class III group. The RCR had a moderate positive correlation with the LAAT. Conclusion: Based on several limitations, this study found that maxillary incisor roots were at risk of penetrating the alveolar bone of Class II division 2 patients, and mandibular incisors may have a relatively small range of safe movement on both the labial and lingual sides of Class III patients during orthodontic treatment.

Microbiome and metabolome associated with white spot lesions in patients treated with clear aligners.

White spot lesions (WSLs) have long been a noteworthy complication during orthodontic treatment. Recently, an increasing number of orthodontists have found that adolescents undergoing orthodontic treatment with clear aligners are at a higher risk of developing WSLs. The oral microbiota and metabolites are considered the etiologic and regulatory factors of WSLs, but the specific impact of clear aligners on the oral microbiota and metabolites is unknown. This study investigated the differences in the salivary microbiome and metabolome between adolescents with and without WSLs treated with clear aligners. Fifty-five adolescents (aged 11-18) with Invisalign appliances, 27 with and 28 without WSLs, were included. Saliva samples were analyzed using 16S rRNA gene sequencing and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS); the data were further integrated for Spearman correlation analysis. The relative abundances of 14 taxa, including Actinobacteria, Actinomycetales, Rothia, Micrococcaceae, Subdoligranulum, Capnocytophaga, Azospira, Olsenella, Lachnoanaerobaculum, and Abiotrophia, were significantly higher in the WSL group than in the control group. Metabolomic analysis identified 27 potential biomarkers, and most were amino acids, including proline and glycine. The metabolites were implicated in 6 metabolic pathways, including alanine, aspartate and glutamate metabolism; glycine, serine and threonine metabolism; and aminoacyl-tRNA biosynthesis. There was a correlation between the salivary microbial and metabolomic datasets, reflecting the impact of clear aligners on the metabolic activity of the oral flora. A concordant increase in the levels of Lachnoanaerobaculum, Rothia, Subdoligranulum and some amino acids had predictive value for WSL development. In summary, when adolescents undergo long-term clear aligner therapy with poor oral hygiene habits, clear aligners can disrupt the balance of the oral microecosystem and lead to oral microbiota dysbiosis, thereby increasing the risk of developing WSLs. Our findings might contribute to the understanding of the pathogenesis of WSLs and provide candidate biomarkers for the diagnosis and treatment of WSLs associated with clear aligners.

Biomechanical factors in the open gingival embrasure region during the intrusion of mandibular incisors: A new model through finite element analysis.

Introduction: Open gingival embrasure (OGE) is a common complication in adults following clear aligner therapy and the influence of gingival or alveolar bone biotype on OGE is of great concern. Unfortunately, due to the limited number of patients with clearaligner therapy and the clinical methods to distinguish the gingival biotype of patients being invasive, it is difficult to carry out clinical studies on the gingival or alveolar bone biotype of the OGE. In the meanwhile, the detailed biomechanics of the occurrence of OGE remains unknown. The goal of this study was to establish a new model to simulate the virtual space region, namely, the OGE region, to investigate the relationship between alveolar bone biotype and the occurrence of OGE, and explore potential biomechanical factors related to OGE. Methods: The OGE region in the interproximal space was established using a filler with a very low modulus of elasticity (1 × 10-6 MPa). To illustrate the biomechanics of OGE more exhaustively, a line was created at the top of the alveolar crest along the proximal tooth root. FEA was then used to analyze the biomechanics of the surrounding tissues, the OGE region and the line at the top of the alveolar crest along the proximal tooth root of the central incisor under two different labial bone thicknesses (thick and thin) with an axial inclination of 80°, 90° and 100°. Results: During intrusion of the incisors in clear aligner therapy, as inclination increased or bone tissue became thinner, the stress in the surrounding tissues [tooth root, alveolar crest, and periodontal ligament (PDL)] was greater. In the OGE region and interproximal alveolar crest, the strain increased with increasing inclination and labial bone thinning. The results from the line at the top of the alveolar crest along the proximal tooth root showed more detailed biomechanics: In all groups, stress and strain were focused on the mesial-labial alveolar crest. Interestingly, our results also demonstrated that when OGE occurs, other complications may arise, including root resorption and bone dehiscence.

IPR treatment and attachments design in clear aligner therapy and risk of open gingival embrasures in adults.

BACKGROUND: The incidence of open gingival embrasures (OGE) in patients after fixed appliance treatment is relatively high, while there are no detailed reports on patients after clear aligner therapy. Also, no clinical studies with large sample size have investigated whether interproximal enamel reduction (IPR) can actually avoid OGE. The purpose of this study was to determine the prevalence of OGE in adults after clear aligner therapy and to investigate the risk of OGE associated with IPR treatment and attachment design, focusing on the amount and distribution in mandibular anterior teeth. METHODS: Pre-treatment and post-treatment intraoral frontal photographs of 225 non-extraction patients were evaluated retrospectively for the occurrence and severity of OGE. The amount of IPR and the number of attachments in the anterior teeth from subjects after screening were recorded according to the first version of clear aligner software (Clincheck, San Jose, USA) and clinical medical documents. Logistic regression analysis was performed to identify the factors contributing to OGE. RESULTS: The incidence of OGE in non-extraction patients after clear therapy between maxillary and mandibular central incisors was 25.7% and 40.3%, respectively. IPR was not associated with the occurrence of OGE but was associated with severity (P < 0.05). The number of attachments in the anterior teeth or central incisors was significantly related to the incidence of OGE (P < 0.05) but was not associated with severity. CONCLUSION: A high rate of OGE occurs after clear aligner therapy. Clinicians should be aware of the application of IPR and the design of attachments during clear aligner therapy.

Three dimensional quantitative study of soft tissue changes in nasolabial folds after orthodontic treatment in female adults.

BACKGROUND: With the popularity of medical aesthetic programs, some female adults who will or are undergoing orthodontic treatment often wonder whether orthodontic treatment has adverse effects on the nasolabial folds (NLFs). The aims of the study were to investigate any potential changes in the NLFs and associated peripheral soft tissues after orthodontic treatment of female adults. METHODS: This study compared changes in the NLFs and peripheral soft tissues in female adults undergoing orthodontic treatment using the 3dMD Face system (3dMD, Atlanta, Ga). A total of 52 adult female patient cases (24 teeth extraction, 28 non-teeth extraction) were included to evaluate the effects of different orthodontic treatment regimens on the NLFs and peripheral soft tissues. RESULTS: In the NLFs area, the landmarks of the extraction group were all significantly negatively changed (P < 0.001; the NLF2s average value was - 0.72 mm), and the upper and middle parts of the landmarks were negatively changed in the non-extraction group (P < 0.05; the NLF2s average value was - 0.22 mm). Compared to the non-extraction group, the negative changes in the extraction group were more pronounced (P < 0.005). In the lip region, all landmarks in the extraction group were negative changes (P < 0.05; upper lip (ULP) = - 0.93 mm, lower lip (LLP) = - 1.46 mm), and most landmarks in the non-extraction group were positive changes (P < 0.01; ULP = 0.55 mm). In the cheek area, the left and right buccal of the extraction and non-extraction groups were all negatively changed (P < 0.05), and there was no significant difference between the two groups. CONCLUSION: After orthodontic treatment, the NLFs showed negative changes, which were more obvious in the extraction group. The lip soft tissue had a negative change in the extraction group and a positive change in the non-extraction group, indicating that orthodontic treatment affected the soft tissue around the nasolabial sulcus, and that tooth extraction would lead to more negative changes.

Orthodontic program design based on aesthetic.

Orthodontics is a discipline that is based on aesthetics. It coordinates the relationship among nose, lip, and chin through the movement of teeth and the adjustment of jaw relationship. Orthodontists need to fully analyze the patient's soft tissue profile before treatment. They also need to analyze the existing problems and those that may be solved or caused during orthodontics to guide the design of orthodontic treatment and effectively improve the clinical effect of orthodontics. This article reviews the aesthetic preconditions that guide the design of orthodontic treatment from the perspective of orthodontists.

Comprehensive orthodontic treatment of impacted teeth / 口腔疾病防治

@#Impacted teeth are a kind of complex malocclusion, and their incidence differs among different races, sexes and dental positions. The causes of impacted teeth include systemic factors and local factors, such as endocrine disorders, malnutrition, and acute and chronic infectious diseases. Local factors can cause abnormal tooth development or eruption during the process from tooth development to tooth eruption, such as damaged permanent tooth embryos caused by local inflammation or trauma, insufficient eruption space caused by premature loss of deciduous teeth, and eruption disorders caused by local lesions for example hyperplasia or odontoma. The clinical manifestation of impacted teeth is the absence of a permanent tooth in a normal position. We can use cone beam CT (CBCT) to locate the impacted teeth. Comprehensive orthodontic treatment includes surgical-assisted eruption, extraction of retained deciduous teeth or supernumerary teeth, removal of lesions such as odontomas and cysts, and expansion of the orthodontic space. When the dysfunctional local soft and hard tissues are removed during a surgical operation, the tooth still cannot sprout smoothly, and it needs to be assisted by orthodontic traction-guided eruption or extracted and autotransplantation. A clear diagnosis, evaluation of the difficulty of treatment and appropriate treatment are the keys to improving the success rate of treatment. In this paper, the epidemiology, etiology, diagnosis and corresponding treatment methods of impacted teeth will be reviewed, and the orthodontic treatment of impacted teeth will be comprehensively described to provide a reference for clinicians about the treatment of impacted teeth.

Effects of upper-molar distalization using clear aligners in combination with Class II elastics: a three-dimensional finite element analysis.

INTRODUCTION: The effects of upper-molar distalization using clear aligners in combination with Class II elastics for anchorage reinforcement have not been fully investigated yet. The objective of this study is to analyze the movement and stress of the whole dentition and further explore guidelines for the selection of traction methods. METHODS: Three-dimensional (3D) finite element models are established to simulate the sequential molar distalization process, including the initial distalization of the 2nd molar (Set I) and the initial distalization of the 1st molar (Set II). Each group set features three models: a control model without Class II elastics (model A), Class II elastics attached to the tooth by buttons (model B), and Class II elastics attached to the aligner by precision cutting (model C). The 3D displacements, proclination angles, periodontal ligament (PDL) hydrostatic stress and alveolar bone von Mises stress in the anterior area are recorded. RESULTS: In all of the models, the maxillary anterior teeth are labial and mesial proclined, whereas the distal moving molars exhibit distal buccal inclination with an extrusion tendency. With the combination of Class II elastics, the anchorage was effectively reinforced; model C demonstrates superior anchorage reinforcement with lower stress distribution in comparison with model B. The upper canines in model B present an extrusion tendency. Meanwhile, the mandibular dentition in models B and C experience undesired movement tendencies with little discrepancy from each other. CONCLUSIONS: Class II elastics are generally effective for anchorage reinforcement as the upper-molar distalization is performed with clear aligners. Class II elastics attached to an aligner by precision cutting is a superior alternative for maxillary anchorage control in cases that the proclination of upper incisors and extrusion of upper canines are unwanted.